Fly Fishing – Dirt Roads and Blue Lines

5 Tips for Improving Casting Accuracy

September 19, 2019September 23, 2019Chase Howard

Let’s face it, the more time your fly spends “in the zone” the more likely a fish will eat it! Each method of fly fishing, be it nymphing, dry fly fishing, or streamer fishing, is more successful when you can consistently hit your target. There are very few occasions where being in the trees is the desired outcome, but beyond that each method has its own particular issues that arise from failing to put your fly where you want it.

My buddy Domenick over at Troutbitten always does a great job of emphasizing (reminding me) to put the nymph rig “all in the same current.” Whether it is a single nymph, multiple nymphs, or nymphs and a suspender, having parts of your rig in different currents will lead to drag. Fish often won’t tolerate drag on food they expect to be drifting freely in the current. Be accurate with your placement of where your leader and flies land and enter the water. Set up the drift before the rig enters the flow and your fly will get deeper quicker and reduce the time you spend needing to mend.

Use the net2.jpg — Betz-man admiring the results of an accurate cast. (And good drift)

Dry Flies are where accuracy can really make or break your game. Fish that are elevated in the column feeding just below the surface have a reduced field of vision. If we think of the fish’s view as a cone, the greater the distance they are from the surface, the greater their view area. When fish are deep, it can provide protection, but it requires more energy to come up through the current and pick a bug off the surface. Small fish often can’t afford the vulnerability of sitting just below the surface to feed and they are often the ones rising faster from the river bottom and creating splashier rises. The fish we want to catch are sitting just under the surface letting the forage drift to them. Efficient, right? That means they are less likely to move very far for your offering because it’s out of their field of vision. If you want to use the net, get your fly in the lane they are feeding in.

Accuracy is hugely important with streamers, as well. Casting accurately can set you up to retrieve your fly through the correct holding or feeding water depending on what the fish are doing. As with any form of fly fishing, it’s important to try not to cast across multiple currents. It’s a total misconception that streamer fishing is blindly casting at the bank and pulling your flies back. Be deliberate and target the lies where the fish are and be aware of what is between you and your target. Avoid the conflicting currents that will result in slack. Covering water is one thing, but do so intelligently and with a plan. Pick a target, hit it, and get that fly moving.

Use the net4 — The Streamer King knows where that fly belongs and gets it there consistently.

So, how about those 5 tips for casting more accurately?

LOOK at Your TARGET

It’s an easy concept in theory, but on the water there are countless ways to lose focus on our actual target. I love to share the Delaware River system with folks for their first time. This spring we were working our way down the river, looking for heads breaking the surface. “Oh, there’s a fish! Ten feet off the bank, he’s really coming up! Oh! No, that’s two fish! They are coming up one after the other,” the angler said as he shuttered with anticipation. I shook my head and chuckled to myself before explaining, “Nope, that’s one fish. That second thing you are seeing come up is his tail. Yes, he really is that big.”

When casting to rising fish like this, we want to land the fly upstream of the fish so it can drift down through their feeding lane. The distance above the fish that we need to target depends on the situation. Honestly though, how do you focus on your target and NOT focus directly on that feeding fish? If you keep your eyes on the feeding fish, guess what happens next – we splat the cast on his head and put him down. First, find the fish you plan to cast to and make a plan. Then, pick your target and look at it while you are casting.

Have a Strong Fundamental Cast

I previously wrote about The Five Essentials of Fly Casting. The first step to improving any facet of your casting is to have a strong grasp on the fundamentals and how to form our basic loops. The next step is understanding how you can change your cast to fit the situation you are faced with discussed in The Five Variables of Fly Casting. When you understand what HAS to happen to complete a successful cast, and you know what CAN VARY in a successful cast, you can fit your presentation to fit the puzzle in front of you.

Check Your Stance

Square up! The stance we start casting with is usually with feet shoulder width apart. Don’t start off balance. Once you are comfortable, you can alter your stance to improve accuracy. If you are looking to focus solely on accuracy, place your dominant foot (the same side as your casting arm) forward. Adjusting your stance this way will align your cast closer to your eye, like lining up to throw a dart. This is a difficult stance to be in to cast 80′, but it will help you when you try to keep the entire cast in the same plane.

Keep the Entire Cast in the Same Plane

While we’re talking about throwing a dart, have you ever done so side arm? Probably not accurately! Did you stand crooked and off to the side? No. If your target is directly in front of you, line everything up. Remember trigonometry and figuring angles into the equation? Not very well, right? Keep it simple. If you cast off to the side, you have to compensate for the angle created between your eye, your target and your rod tip. Avoid creating the angle by casting directly overhead. Straight lines whenever possible.

Your back cast should be 180 degrees away from your target and your forward cast will be right on the money. Place your thumb on top of the rod and point it away from the target on the back cast and directly toward the target on the forward cast. Stop your backcast about eye level, near your cheek. This will dial in your aim and make accurate casts much easier to make.

Practice!

These aren’t things to be figured out on the river. Take your nice presentation leader off of your fly line, tie on a stout 7 1/2′ leader and a piece of egg yarn for a fly and go throw some line in the yard. Set up targets and practice hitting them on the first try. Figure out what stance is most comfortable and how many false casts it takes you to get from fly in hand to 40′. Play around and get familiar with the over-engineered piece of graphite we use to unfold plastic coated string and drop fur and feathers in front of fish. It’s the Jedi, not the Lightsaber after all. Master your craft. Use the net. Thank me later.

Trip Preparations

September 10, 2019September 12, 2019Chase Howard

I am a pretty unorganized person. Just ask my wife, buddies, co-workers, etc! There are two things, however, that I can get downright obsessive about:

1. Fly Box Organization

2. Planning Fishing Trips

Box 2 — Labrador Box No. 2 – Only 3 months, 2 days until departure and open space.(Top row are #14 Parachute Adams, for size reference.)

I live for the level of optimism that is present from the instant the idea of a trip or day of fishing brings. From tying and organizing tens of dozens of flies, to spooling too many lines of various sink rates and cast-ability, and building the “perfect” leaders. Truth be told, maybe only a handful of those flies will ever get their moment to shine. The conditions may have you fishing a standard floating line and leader the whole time. Why the hell do we let ourselves get so bogged down in nailing down every single detail? We know from past experience that planning for every possible scenario never guarantees success.

I think as fly fishers we do it because the planning, the excitement we share in text messages and email strings about “what the fish were doing the month/week/day before we get there,” prolongs the enjoyment of our time on the water. A trip can be short, maybe cut down to just a few hours on the water. But planning makes the adventure last for weeks.

As I write this, I’m currently in a fly tying binge. Caught between blobs and woolley bugger variations on one side and tan and pink shrimp and crab imitations on the other. White marabou, jungle cock feathers, and various colors of fritz are tangled on one side of my desk. The other side is a pile of sandy pseudo hair, pink rubber legs, and small lead eyes. My dad and I each have fishing trips in the works. I am anxiously looking forward to returning to the Adirondacks in search of brook trout, colored up and aggressive, preparing for their spawning season. He is headed toward white sandy beaches, bonefish, snook, oppressive heat and humidity, and big starving mosquitoes. Well, the last few are what I’m telling myself knowing I won’t be going. I will be about 1,200 miles from the nearest bonefish, but that hasn’t stopped me from looking for easily wadeable flats or dreaming of scanning the choppy, glared sea surface in search of hungry shadows.

TP1 — Adirondack Brook Trout. No bonefish, no problem… for the time being.

The trips come and go. They are the shortest portion of the story, but they are the everlasting highlights. Memories of fish caught or missed, unforgettable scenery, and friendships formed with other anglers leave us rambling on for years, possibly forever, about the time spent doing what we are incurably passionate about. At least it gives us something to think about while we’re tying flies for the next opportunity.

trip prep2 — My dad with Johnny and one of many streamer eating rainbows from a great day in Montana.

Fish Karma

August 1, 2019August 5, 2019Chase Howard

“Damn, this looks good,” I gushed about the smallish, roiling pocketwater in front of us.

Etienne agreed, “Yeah, it’s really good. That big rapid is full of big fish, but usually if people can hook them, they take them downstream and break off.”

It was easy to see how this would happen. Big fish have a knack for doing exactly what’s required of them to be a hassle, and ultimately, escape. We sat on the bank and observed the pool. Plenty of big caddis were struggling in the current before popping off the surface. Just enough to see exactly the fish I was looking for. “Oh dude, that was a good one.”

“Do your thing.”

I peeled line off the reel and dropped the slack to the ground as I set my feet on the river’s edge. Curved-Reach Cast to the right, I thought to myself as my No. 8 olive and yellow Stimulator sailed toward the target. Mend, mend, nothing. A good drift with no response. I tried a similar shot and got a splashy rise. A nice brookie that was 8 or 10 inches, but respectively a minnow in these rivers. Back he went. Two more drifts went through with no response before he came up and grabbed another natural.

“Tough current,” I admitted and Etienne nodded with acknowledgement.

“Yep, it is.“

On the next cast, the fly drifted downstream freely, just on the other side of the main current, in front of the submerged boulder we knew the fish was sitting under. The river was deep and we knew it would take a real commitment for him to rise. The surface bulged and the white and black mouth of a rising brook trout engulfed the shaggy imitation.

“Yep!” I shouted. The fish bulled down toward the bottom, from one side of the pool to the other. And then he did what we knew he would do. He took off downstream in the heavy current. “Here we go!” Etienne laughed with subdued excitement as he grabbed the net and trotted down the trail just behind the alders.

On my way down the bank my rod doubled over, applying side pressure to coax him into the calmer water at our feet. The cagey char had wrapped himself around a big boulder and the line stopped. Etienne strode down the trail making sure I had a clear path and a net man ready. Suddenly, he realized I was no longer following him.

“Well, that was fun!” he joked while stepping back to where I had stopped with the line still taught. I tried twice to free the line from the snag, still skeptical of why the line remained under tension. On the third or fourth attempt, I threw in a little extra effort and displayed my impressively small vertical leap. Coupled with a circular overhead sweep of the rod tip and line, everything dislodged over the top of the rock, and the fish continued downstream with violent headshakes. As we followed the somehow still connected fish down the main flow Etienne chuckled, “Oh, you are so lucky!”

The luck got even more laughable. After we got around the boulder garden and downstream of the fish, he was ready to give up and slid neatly into the net. Shaking his head, Etienne muttered, “Man, you’ve got some crazy fish karma.”

Call it whatever you’d like. Luck, karma, or the result of fishing size 8 dry flies on 2X, I’ll take it. I sat on the bank and replaced my absolutely shredded leader and took a moment to soak it all in. Everything that could have gone wrong did and somehow we were still fortunate enough to capture and release a stunning trout. The only thing left to do was to set off to find the next rising trout.

Labrador

July 18, 2019August 5, 2019Chase Howard

“I’m not sure you should be reading that,” lamented my dad. He saw his old copy of Trout Bum by John Gierach at the top of my stack of text books as I was packing up to head back to Philadelphia after the holidays. “You’ll quit school and move out West.” Honestly, how did I not quit school and move out west?

In my days at Drexel, you were more likely to find me sucked into tales about one of Gierach’s fishing trips than one of my engineering text books. Shocker. The story that stuck with me most of all was the one about fishing dry flies for brook trout that were measured in pounds. In what kind of other galaxy was this even remotely possible? Labrador.

Labrador was always kind of a magic word to me. Where the hell was this place? A long way away, but I knew, someday, I had to go there. More recently my uncle was visiting us from Maine for a family get together and asked my dad and I, “Would you like to go to Labrador?” Um, YES.

My uncle personally knew a guide who hosted trips and one of his destinations was in the magical land of mega brook trout. Over the course of a year and a half of hoarding vacation time and extra cash, the excitement began to build. Fifteen or so years ago, I had read about this place and now somehow it was our next destination.

I’m not going to lie, expectations were very high, but having never been somewhere like this, I didn’t have any idea what was realistic. Well, expectations were met and exceeded. I have never seen better fishing in my entire life. It was an adventure from the minute we said we were in. Skeptical Canadian Border Crossing Guards, driving 120 km/hr on sketchy dirt roads through Quebec, not speaking a lick of French, missing ferries across the Gulf of St. Lawrence, float plane delay days, and learning about birds and edible plants in the boreal forest all paled in comparison to the brook trout fishery.

We were spoiled with finely prepared French cuisine, escorted to the best sections of river in wooden square stern canoes propelled by 20 horse short shaft outboards, greeted anxiously by ravenous mosquitoes and black flies wherever we went, and welcomed back to camp by Zula the wonder dog. Caddisflies, mayflies, and stoneflies hatched steadily every day. If fish weren’t willing to look up, they would usually react with a well presented streamer. Most often though, it was the dry flies they wanted. Who was I to argue!

It’s been a dream of mine to go to Labrador for years and it’s still sinking in that we got to experience such an incredible place. Sharing the journey with my dad and uncle made it even more unforgettable. Watching kyped beaks break the surface for emerging caddis in margins of rapid rivers, followed behind by a vermiculated dorsal and broad red tail waving like a flag will forever be burned into my brain.

The Five Variables of Fly Casting

April 26, 2019August 5, 2019Chase Howard

I previously wrote about the Five Essentials of Fly Casting. Over the last few years, I’ve spent countless hours working with our casting group in Warren, PA. In that time, we primarily practiced the Fundamentals of Casting, constructively critiqued one another, and worked on teaching casting to others. Learning and practicing the Five Essentials should be the first steps as a Fly Caster. Once you have a solid grasp on the fundamentals, you can begin to understand the next group of fly casting skills. Skills our fearless leader and Fly Fishers International Master Casting Instructor, Gary Kell refers to as Five Variables. While maintaining the Five Essentials, these Five Variables are practical changes we can make to our basic cast to create Fishing Casts. The Five Variables are:

Loop Size
Loop Speed
Loop Plane
Loop Trajectory
Rod Mends

Loop Size

The Loop is the “U” shape created by our fly line outside of our rod tip. As we make a cast, the line forms two “legs,” the Rod Leg and the Fly Leg. Loop Definitions We generally refer to the size of loop size as narrow (3 ft wide or less), medium (3 to 6 ft wide), and wide (6 to 8 ft wide or more), referring to the distance between the rod leg and fly leg.Narrow loops are the most efficient loops and are critical for casting in the wind, around obstacles, and casting for distance. As a fisherman however, medium and wide loops can be essential in the proper situations. When casting indicators and split shot or heavy sinking lines, gravity becomes the enemy of tight loops. The added weight can cause the fly leg to collapse and create infuriating tangles. I know well from past experience.

We can increase our loop size by increasing our casting arc for a particular length of line. This increase in casting arc creates the convex rod tip path (more circular) mentioned in the Five Essentials.

Beware, the shorter we can make our casting stroke for a length of line, the narrower our loops will be, to a point. If we use too short of a casting stroke for a length of line, we will end up with a tailing loop resulting in knots and tangles.

Loop Speed

We can vary our loop speed from slow, to moderate, to fast. Moderate would be considered a comfortable casting speed. Slower loops take less energy and can be helpful for more delicate presentations whereas, faster loops take more energy but can be helpful in windy conditions, to deliver a fly to a moving fish, or while your boat is moving quickly past your target.

An important thing to remember when varying loop speeds, the more force you apply to the rod, the more it bends the rod. Therefore, in order to maintain our loop shape, we have to make a few adjustments. If we cast faster loops, the more the rod bends, requiring a longer casting stroke and shorter pause. If we cast slower loops, the less the rod bends, requiring a shorter casting stroke and longer pause.

Varying Loop Speed
Slow		Fast
Force	Less	Force	More
Casting Arc	Shorter	Casting Arc	Wider
Pause	Longer	Pause	Shorter

Loop Plane

Our fundamental cast is typically made with a vertical loop plane. There are occasions where we need to change the plane in which our rod travels and, in turn, the plane our loops form. These casts are commonly referred to as a side-arm cast or a cross body cast. We can use these fishing casts when we encounter obstructions or when wind becomes a safety concern (for you or your pals). If we form our loops on the down-wind side of ourselves we can execute a safer cast. Safer, because the wind carries the loop and fly away from us instead of blowing them into us.

If you fail to execute a safe cast, here is a link for a video on how to safely remove a hook from skin. (It works. Yet again, I speak from past experience.) Varying Loop Plane In these situations, our Five Fundamentals remain important. We want our rod tip to follow a straight line path. However, we tip the entire casting arc on its side. When we do this, gravity can again become our nemesis and drag our loops down. A good idea when casting on a horizontal plane is to increase our loop speed to avoid having your fly ticking the grass or slashing the water surface.

Loop Trajectory

Generally speaking, we cast our loops with horizontal trajectory, straight back and straight forward. We can vary the trajectory of our loops depending on the fishing situation. It is important to note, we need to maintain loops that are 180º from one another. If we cast upward in the front, our backcast needs to be tilted downward. If we cast downward in the front, our backcast needs to be titled upward.

When we are casting for accuracy, we want to cast with a downward trajectory toward our target. This eliminates the chance the wind can blow our line and fly off target. If we have overhead branches behind us we need to cast downward underneath them, and as a result, our forward cast must have an upward trajectory.

Trajectory of our loops is varied when we stop higher or lower on our casting stroke. For an upward trajectory, stop the rod higher in an ascending manner. To direct our cast downward, stop the rod lower in a descending path.

Varying Loop Trajectory

Rod Mends

The most important thing to remember with rod mends is that the fly line will follow the tip of the rod. Once we have stopped on our forward cast our fly line and fly are going to travel in the direction we’ve just sent it. After we stop, we can use the rod tip to influence what happens between our rod tip and the target.

When we are fishing artificial flies that imitate things that aren’t strong swimmers or are at the mercy of the current (insects, eggs, etc.), it is critical that our offering is free of drag and is floating along freely with the flow. Once the fly is on the water we can mend our flies to achieve a drag free drift. It is, however, much easier to manipulate fly line BEFORE things like current and surface tension start influencing our fly line. As mentioned above, we can manipulate the rod after we stop on our forward cast and our line is still in the air to perform what are referred to as aerial mends.

There are countless ways we can execute aerial mends, but probably the most common is the reach mend. As shown below, we move the rod from location 1 to location 2 in our basic casting stroke. Once we have stopped at location 2, we move the rod to location 3 as the line is traveling toward the target. By changing the angle between the rod tip and the target, we place controlled slack that will be a buffer between our fly and line under tension created from the current. Instead of having a direct connection to our fly and a line under tension, we have bought ourselves a few more seconds of drag free drift without risking pulling our fly under water with an on the water mend.

Rod Mends

The Five Variables are essential skills for those interested in using the fly cast as a tool to catch more fish. Once you have a strong foundation built upon the Five Essentials, practice these Five Variables. You’ll be surprised how much more enjoyable time on the water is when you can eliminate tangles and have the tools to catch those extra finicky fish.

Fishing Buddies

April 16, 2019August 5, 2019Chase Howard

I can’t imagine having better fishing buddies. It’s funny the way it evolves, too. One day a guy you’ve fished with only a few times says, “I’ve got a guy we really should take along sometime.” A few years later, you don’t remember what it was like fishing without either of them.

When I got started fly fishing, it was almost always by myself. Now, it’s rare. Sharing those good or bad times on the river with close friends makes it a whole different experience. They get to razz you when you totally blow a cast or a drift. And it’s ok, because they have hooksets you are still rolling about from several seasons ago. One of my recent favorites was Kris recalling, “Dude, remember the fish last year that refused you 4 times and just moved a few feet down each time? That was so awesome.” Yeah, uh that was… great? Thanks a lot. Haha.

It feels jaded to say, but fish, spots, and beautiful, contrasting colors all seem to run together. Vivid memories of good days on the water with good friends never seem to fade.

The Five Essentials of Fly Casting

March 28, 2019August 5, 2019Chase Howard

When making a successful fly cast, there are a ton of things that vary. With that in mind, we consider Five Essentials that remain true for all efficient casts regardless of a person’s casting style. The Five Essentials are considered fundamental basic building blocks for wide range of casts to meet the countless situations that come up while fly fishing. Put simply, we must:

Eliminate Slack
Accelerate Smoothly to a crisp stop
Straight Line Path of the rod tip
Casting Arc must vary with the amount of fly line
Pause between back cast and forward cast

Eliminate Slack

Before we begin our cast, we need to be sure we have removed excess line outside the rod tip and have anchored the line. To anchor the line, we can use our rod hand by gripping the line against the cork or we can use the line hand (typically we use the thumb and forefinger on the hand not holding the rod).

If we start our casting stroke with a pile of line at our feet, we waste a portion of the casting arc removing slack. If there is no slack in the system, the fly will move as soon as the rod tip moves.

How do we remove slack? We can strip in excess line or roll cast our line into a better pick-up position. We want our rod tip pointing toward our fly line and fly.

Accelerate Smoothly

This is how we apply power to the rod and use the mass of the fly line to load or bend the rod. The amount of force we apply varies depending on several conditions, but the HOW we apply force remains the constant. Once slack is removed, begin slow and smoothly accelerate to a crisp STOP at the end of the casting arc. For proper acceleration, remember:

Start Slow – Finish Fast

Straight Line Path

To sum this up in one sentence: the line will follow the path of the rod tip. With no slack in the system, we smoothly accelerate to a stop, and as we load the rod, it bends. The bend in the rod makes up for the circular rotation created when we move the rod from forward at and angle to overhead and slightly past vertical.

If we don’t accelerate smoothly and we apply the improper amount of force, the rod will bend either too little and create a convex path or the rod will bend too much and create a convex path. The convex path of the rod tip creates a wide loop, which is generally inefficient (though it has its proper applications). The concave path of the rod tip creates what is called a tailing loop, where the fly leg dips below the rod leg, and creates wind knots (aka bad casting knots).

With the proper acceleration, we create narrow loops that are 4′ wide or less with parallel rod and fly legs.

Casting Arc

If we begin the cast with our forearm, we call that translation. As we continue to accelerate, we rotate with the wrist. Translation and Rotation are what make up our Casting Arc.

Flat First – Rotate Late

The important thing to remember about the casting arc is that it should match the amount of line we have outside the rod tip.

Short Cast = Short Line = Smaller Casting Arc, Long Cast = Long Line = More Casting Arc.

Pause

At the end of our Casting Arc, we finish accelerating with a crisp STOP. This stop is what forms our loop. At this point, we need to pause to let our loop unfold. The duration of the pause will vary with the length of the line. A trick to pausing for the correct amount of time is to think of your cast in 180 degrees. Just before the line straightens on your forward cast, you can begin your back cast. Unless you are shooting large amounts of line (we’ll talk about that more in the future) the pause will be the same on back as it is in the front.

If we pause too long, our line will end up in the water behind us or on the ground. If we don’t pause long enough, we hear a whipping sound. If you are dead set on idolizing Hank Patterson, use a short pause and “Snap It!”

Short Cast = Short Line = Short Pause | Long Cast = Long Line = Long Pause.

Practice and master the basics. They are the building blocks for all of the casts you can make with a fly rod. If you are having any issues with your cast, be sure to start with the 5 Essentials to begin to correct your cast.

Soak It In

March 11, 2019August 5, 2019Chase Howard

A few years ago I made a trip out to Arkansas with a buddy and we saw a grand total of 4 hours of meager generation and nothing else but minimum flows for four days. With almost no discussion, we knew what it meant. Four days of fishing until 2 am, getting some quick sleep and a shower, and back on the water by 6 am. I feel like, two years later, I’m ready to admit that was hard haha. Would I do it again tomorrow? Just say go.

We knew we only had a few days and wanted to see as much as humanly possible. We fished with Alex Lafkas during the day and put some good numbers of fish in the boat. With skimpy flows we just weren’t finding the size that system is known for. Pat told me that night that the tone was set when, after Alex netted the first 18″ fish, he asked me if I wanted to get a pic. My answer should have been a little more tactful than, “mmm… No, let’s keep fishing.”

I personally learned a ton fishing and hanging out with Alex and seeing a new river. He was very helpful pointing us to spots to check out on our own and had us into fish even when he wasn’t around. No one can MAKE the fish eat, but we did our damnedest to try! We ended up getting a handful of good ones we wouldn’t have if we’d mailed in. Sometimes, you gotta just get after it.

I’m pretty lucky to fish with some die hard anglers: buddies, guides, and some assorted weirdos. They make me a better angler and a better person. They make me push the limits for “comfortable” and find out what is really possible. Surround yourself with people who are thoughtful and better anglers than yourself. People who ask you to explain why you’re doing things the way you are and expect a damn good answer.

You have to have goals in mind. It really is important to push yourself. Just don’t forget to take time to sit back, crack a beer, and appreciate the moments ingrained in trying to find fish. There is certainly a dichotomy to all this. Sometimes you have to get out there and bust it and sometimes you have to accept the bite is off or the bugs aren’t hatching. Fish hard anyway, but take time to grab some food, share some stories, and joke around with your buddies. Ask some questions and treat ‘bad’ fishing as an opportunity to learn something and test some theories. Get out there and live it. Soak it in.

Grow

March 3, 2019August 5, 2019Chase Howard

I think the older you get, the more time spent on the water, the more you appreciate the moments that capture, “Why?”

I’m not a musky guy. I’m not a warm water species guy. Hell, I’m not even a warm weather guy. I’m infatuated with trout and all of the completely unique ways to catch them. Over the last few years, my closest fishing friends have caught the musky bug and have been doing their best to convert me.

I like to think I’ve been there the whole time, supporting their changing interests. I told my buddy Pat the last time we fished, “My biggest regret in fly fishing is rowing you into your first musky!” Ha! Not really. When it comes down to it, watching your closest friends grow and supporting it (while still complaining about how bad their musky net smells) is one of the best things you can experience in fly fishing.

I have rowed my buddies into musky, pike, and all sorts of bi-catch that comes along with it. They have gotten GOOD and I’ve had a front row seat to some wild things. But when their arms are wrecked and they need a break, they become great guides who insist I wave the broomstick, goat rope, and half chickens around. Of course, there’s always that guy who’s more lucky than good. If you hang around long enough, you get to be that guy.

It’s important to know what you like; to have your fly fishing raison d’etre. If you keep a closed mind, however, you limit your own growth and the growth of those around you. There’s a big, wide beautiful world out there, lots of species to catch, and countless ways to do it. Try something new.

Hatch Hunting

July 26, 2018August 5, 2019Chase Howard

Regardless of what’s happening in the world, political bullshit, work bullshit, all bullshit, it all has a tendency to drift away with rushing currents, wind drifts, or tides. It’s like you cease to exist in the real world, at least for a little while, and submit to the natural order of things.

To me, it’s never more evident than chasing hatches and rising trout. It’s a perpetual quest to be in the right place, at the right time, with the right conditions. Witnessing the perennial transition of mayflies from nymph to subimago, imago, and eventually a dead bug on the water surface that a trout can’t resist gulping down is the essence of fly fishing.

It’s almost cruel how short the prime dry fly season is in the east. That just makes it more critical to make hay while the sun shines and let the calendar and conditions set your course. Every year is different though and I think that’s a big part of what renews the fever, year after year. It’s such a refreshing challenge.

Early on, the mysticism of mayflies and the trout “jumping” on the surface is what brought me to pick up a fly rod without really understanding what I was witnessing. The fish were acting ridiculous and I wanted to be in on the secret. Years later, I’m neglecting sleep and stumbling through pastoral settings in the dark, hoping that I went far enough to avoid that long abandoned barbed wire fence and countless other things so I can stay long enough and search for risers. The stranger thing is finding yourself neglecting fishing time to plant trees along those creeks, recording water temperatures and chemical properties, and meeting with professionals to coordinate construction and permitting to stack logs in creeks just to hopefully create more opportunities.

Whatever your in-road is to fly fishing, whatever the species or setting, jump in with both feet. You’ll be amazed where the journey takes you.